$1,299 (Overstock Price)
The SE100 is a lightweight, efficient, 100% breathable portable heater that runs on diesel, kerosene or kerosene based fuels. This affordable heater can be used from residential application such as heating a garage to commercial applications like drying concrete & pre heating equipment. The SE100 has been extremely popular in the North American helicopter industry, as well as in the North American construction market as the small size & BTU output of this heater make it a popular choice in whatever remote corner of the World you have to work in.
SPECIFICATIONS
TYPE OF HEATER
110 Volt Electric Plug In
Indirect-Fired Portable
DIMENSIONS
47 long x 27 high x 18 wide
UNIT WEIGHT, DRY
43kg (94lbs.)
VENTILATING AIR OUTPUT
5000 lbs. per hour at -54°C (-65°F)
VENTILATING AIR SUPPLY PRESSURE
2.5cm (1) w.c. at discharge plenum.
MAXIMUM TEMPERATURE RISE
174°C (345°F) at -54°C (-65°F)
TYPE TEMPERATURE CONTROL
Optional Thermostat Control Part# 4E636
FUEL CONSUMPTION (280°F OUTPUT)
0.81 Gallons/hr. at 0°F ambient
MAXIMUM HEATING CAPACITY
113,000 BTU/hr. at -65°F at sea level
OPERATING AMBIENT RANGE
-65°F to 120°F
OUTLET AIR TEMPERATURE RANGE
180-280°F (ADJUSTABLE)
RATED AIRFLOW
880 CFM at 0° in W.G.
TYPE OF FUEL
All Diesel and Kerosene plus Kerosenebased Jet Fuels
FUEL CAPACITY
12 gallons, self contained tank
ENGINE
Electric Motor Prime Mover
ONE PIECE EXHAUST PIPE
5 ¾ inch diameter x 7.5 inches long
FLEXIBLE DUCT SIZES
12 inch diameter x 15 feet long (1 each)
6 inch x 15 feet long (3 each)
RUNNING GEAR
7 ½ inch rubber tires with handle bar,
allows for easy movement. (Towing not recommended)
LOW TEMPERATURE STARTING REQUIREMENTS
Optional Heated Fuel Filter
FINISH
Normally yellow.